|
||
| Home Company News Products Datasheet Contact Turnkey Careers | ||
| Product Search | ||
| Product Grade | ||
|
Hi-Temp Grade
Hi-Rel Grade Industrial Grade |
||
| Power Architecture | ||
| Application Note | ||
| Request Info | ||
|
Request Quotation
More Info Newsletter Registration |
||
|
||
| Home> Products> Hi-Rel Grade> Hi-Rel Grade Product Qualification |
|
Hi-Rel Grade Product Qualification | |
|
To verify the suitability of GAIA Converter’s Hi-Rel grade module family for Aerospace / Military application
environment, the products have been subjected to the environmental qualification of MIL-STD-810, MIL-STD-202
and MIL-STD-461 requirements. |
These tests listed below have been performed by independent defense laboratories.
Test Reports are available upon request at GAIA Converter Headquarters.
An example of test report is avalaible hereafter . |
Environmental test report.
|
| Specification | Standards | Conditions |
| Life at high temperature |
per MIL-STD-202G Method 108A |
Operation : 1.000 hrs @ +105°C case Storage : 1.000 hrs @ +125°C ambient |
| Low temperature |
per MIL-STD-810E Method 502.3 |
Storage : 1.000 hrs @ -55°C ambient |
| Temperature cycling | per MIL-STD-202A Method 102A |
Number of cycles : 200 Temperature change : -40°C / +85°C Transfert time : 40 min. / steady state time : 20 min. |
| Thermal shock | per MIL-STD-202G Method 107G |
Number of shocks : 100 Temperature : -55°C to + 105°C Transfer time : < 10 s / steady state time : 30 min. |
| Altitude | per MIL-STD-810E Method 500.3 |
40.000 ft, unit functionning 1.000 ft/min to 70.000 ft, unit functionning |
| Humidity cyclic | per MIL-STD-810E Method 507.3 |
Damp heat : 60 % to 88 % relative humidity Cycle 1 (31°C to 41°C) : 240 hrs |
| Humidity steady state | per MIL-STD-202G Method 103B |
Damp heat : 93 % relative humidity Temperature : 40°C Duration : 56 days |
| Salt atmosphere | per MIL-STD-810E Method 509.1 |
Temperature : 35°C Duration : 48 hrs |
| Vibration | per MIL-STD-810D Method 514.3 |
10 cycles in each axis Frequency : 10 to 60Hz/60Hz to 2kHz Amplitude/acceleration : 0,7 mm/10 g |
| Shock | per MIL-STD-810D Method 516.3 |
3 shocks in each axis Peak acceleration : 100 g Duration : 6 ms |
| Bumps | per MIL-STD-810D Method 516.3 |
2.000 bumps in each directions Duration : 6 ms Peak acceleration : 40 g |
| Conducted emission | per MIL-STD-461C CE01 Fig 2.1 CE03 Fig 2.2 |
module stand alone with externel filter (see technical datasheet for details) |
| Conducted Susceptibility | per MIL-STD-461C CS01, CS02, CS06 |
with external filter (see technical datasheet for details) |
| Radiated emission | per MIL-STD-461C RE01, RE02 |
module stand alone |
| Radiated susceptibility | per MIL-STD-461C RS01, RS03 |
module stand alone |
